Watch the Basics guide to learn the basics
about the tevaplanter vessel and how to best
use it for a successful growing experience.
6 Growing Methods
Learn about the six different ways to start planting and growing.
Suitable plant list
Plants that we have tried and tested. At first we recommend you choose
from the list and pay attention to the level of experience required.
The higher the level of experience the more difficult.
i
Moth Orchid
Moth Orchid
Phalaenopsis orchid
Growing Method
In nature the Phalaenopsis orchid grows in rainy and high humidity areas on tree trunks. In its natural environment it gets wet and dries out periodically, so after you mount the Phalaenopsis orchid on the vessel; We recommend to fill the vessel 1/3 to max 1/2 of the way with water, that way the roots have enough water and not to much. Its also important to let the roots dry completely by letting the water level drop until the vessel is almost empty (green roots are wet, white roots are dry). In addition, it is important to know that orchids are plants which are more difficult to grow, they have a slow growth and can take months for new roots to grow. We recommend to spray the plant daily in order to increase humidity.
Expert
Placement
Mid-Upper
Growth Speed
6+ Months
Partial shade-
Bright light
60ºF to (15ºC)
80ºF (26ºC)
Fertilize every
2-3 Weeks
In nature the Phalaenopsis orchid grows in rainy and high humidity areas on tree trunks. In its natural environment it gets wet and dries out periodically, so after you mount the Phalaenopsis orchid on the vessel; We recommend to fill the vessel 1/3 to max 1/2 of the way with water, that way the roots have enough water and not to much. Its also important to let the roots dry completely by letting the water level drop until the vessel is almost empty (green roots are wet, white roots are dry). In addition, it is important to know that orchids are plants which are more difficult to grow, they have a slow growth and can take months for new roots to grow. We recommend to spray the plant daily in order to increase humidity.
i
Grass
Grass / tall fescue
Festuca arundinacea
Growing Method
Grass grows all over the world and in diverse weather conditions. It is a spreading plant and usually grows in soil. On the tevaplanter we start growing grass from seeds, the seeds are dry and in order to adhere them to the tevaplanter it is best to mix the seeds with agar-agar to help them stick to the surface. The germination process takes about 10 days (pretty fast!) and the grass can continue to grow on your tevaplanter for years. It's simple, cool and recommended for beginners.
Beginner
Placement
All over
Growth Speed
1-2 Weeks
Partial shade-
Bright light
40ºF to (4ºC)
78ºF (25ºC)
Fertilize every
2 weeks
Grass grows all over the world and in diverse weather conditions. It is a spreading plant and usually grows in soil. On the tevaplanter we start growing grass from seeds, the seeds are dry and in order to adhere them to the tevaplanter it is best to mix the seeds with agar-agar to help them stick to the surface. The germination process takes about 10 days (pretty fast!) and the grass can continue to grow on your tevaplanter for years. It's simple, cool and recommended for beginners.
i
Kangaroo Fern
Kangaroo Fern
Microsorum diversifolium
Growing Method
This fern is one of our favorite plants, originally grown in Australia this creeping plant grows both in soil and on tree trunks. The Kangaroo fern loves its roots consistently moist, which is why we recommend planting it at the bottom of the tevaplanter and never let the vessel dry. Over time the plant roots will take hold and the plant will start growing upwards covering the tevaplanter completely. The first period after planting is stressfull for the plant and will take longer than a month or two for the plant to get used to its new home and start growing.
For Experience Growers
Placement
Low & Mid part
Growth Speed
2-3 Month
Partial Shade-
Bright light
50ºF (10ºC) to
100ºF (37ºC)
Fertilize once
a month
This fern is one of our favorite plants, originally grown in Australia this creeping plant grows both in soil and on tree trunks. The Kangaroo fern loves its roots consistently moist, which is why we recommend planting it at the bottom of the tevaplanter and never let the vessel dry. Over time the plant roots will take hold and the plant will start growing upwards covering the tevaplanter completely. The first period after planting is stressfull for the plant and will take longer than a month or two for the plant to get used to its new home and start growing.
i
Maidenhair fern
Maidenhair fern
Adiantum raddianum
Growing Method
Adiantum is part of a very large family of ferns, they grow all over the world and each one is slightly different. The Adiantum is a very beautiful and beloved houseplants but tend to dry out and die suddenly. Usually the problem is dehydration. In nature it grows near a water source and thrives on its wet surroundings which keeps its roots always moist. We recommend to mount it at the lower part of the tevaplanter vessel and try to keep the water level high without ever letting the tevaplanter vessel dry out.
For Experience Growers
Placement
Low & Mid part
Growth Speed
2-3 Month
Partial shade-
Bright light
50ºF (10ºC) to
80ºF (27ºC)
Fertilize once
a month
Adiantum is part of a very large family of ferns, they grow all over the world and each one is slightly different. The Adiantum is a very beautiful and beloved houseplants but tend to dry out and die suddenly. Usually the problem is dehydration. In nature it grows near a water source and thrives on its wet surroundings which keeps its roots always moist. We recommend to mount it at the lower part of the tevaplanter vessel and try to keep the water level high without ever letting the tevaplanter vessel dry out.
i
Baby Tears
Baby Tears
Soleirolia soleirolii
Growing Method
Baby tears enjoys humidity and prefers to grow in a shady environment. It's a beautiful houseplant and a great choice to grow on the tevaplanter. The methods to start growing it is by replanting and the idea is to gently separate the soil from the roots while trying to keep the roots whole and safe. Later, try to flatten the shape of the roots as much as possible and mount it on the moist surface of the tevaplanter. Secure it with rubber bands and keep the tevaplanter moist in a light and airy environment.
For Experience Growers
Placement
Lower part
Growth Speed
3-4 Weeks
Partial shade-
Bright light
50ºF (10ºC) to
70ºF (21ºC)
Fertilize once
a month
Baby tears enjoys humidity and prefers to grow in a shady environment. It's a beautiful houseplant and a great choice to grow on the tevaplanter. The methods to start growing it is by replanting and the idea is to gently separate the soil from the roots while trying to keep the roots whole and safe. Later, try to flatten the shape of the roots as much as possible and mount it on the moist surface of the tevaplanter. Secure it with rubber bands and keep the tevaplanter moist in a light and airy environment.
i
Begonia hirsuta
Begonia hirsuta
Growing Method
This Begonia hirsuta is not very common and can be hard to find but if you manage to find a few seeds you'll be able to grow an impressive plant. Generally begonias are a very big family of plants, some of them are suitable to grow on the tevaplanter and some not. This specific begonia is very tolerant and it's easily growing, flowering and seeding herself on the tevaplanter. There are 3 methods to start growing: seeds (mixed into fine-soil), replanting and stem cut.
For Experience Growers
Placement
Low & Mid part
Growth Speed
1-2 Month
Bright light-
Partial sun
68ºF (20ºC) to
78ºF (25ºC)
Fertilize once
a month
This Begonia hirsuta is not very common and can be hard to find but if you manage to find a few seeds you'll be able to grow an impressive plant. Generally begonias are a very big family of plants, some of them are suitable to grow on the tevaplanter and some not. This specific begonia is very tolerant and it's easily growing, flowering and seeding herself on the tevaplanter. There are 3 methods to start growing: seeds (mixed into fine-soil), replanting and stem cut.
i
Chia
Chia
Salvia hispanica
Growing Method
*Important tips for your grow:
1. Make sure the seeds look fresh and healthy.
2. Fill the vessel to the top with water and keep water level high the first week.
3. Spray the top section of seeds with a little water to help start their grow.
Chia is very easy to sow onto the tevaplanter, it grows fast and looks great but can only live for a short period of time, We treat growing chia as a test run. The process of chia sprouting and growing from seeds is a nice educational visual experience to share with kids. In the first days after sowing, we recommend to spray the seeds at the top part of the tevaplanter in order to help them sprout. IMPORTANT use ONLY fresh seeds, old seeds simply wont sprout and may rot.
Beginner
Placement
All over
Growth Speed
1-2 Weeks
Partial sun
60ºF (15ºC) to
80ºF (27ºC)
Fertilize once
a month
*Important tips for your grow:
1. Make sure the seeds look fresh and healthy.
2. Fill the vessel with water to the top and keep the water level high the first week.
3. Spray the top section of seeds with a little water to help start their grow.
Chia is very easy to sow onto the tevaplanter, it grows fast and looks great but can only live for a short period of time, We treat growing chia as a test run. The process of chia sprouting and growing from seeds is a nice educational visual experience to share with kids. In the first days after sowing, we recommend to spray the seeds at the top part of the tevaplanter in order to help them sprout. IMPORTANT use ONLY fresh seeds, old seeds simply wont sprout and may rot.
i
Venus Flytrap
Venus Flytrap
Dionaea muscipula
Growing Method
Venus flytrap grows in swamp areas without salts or minerals. In order to supplement the missing minerals the plant evolved to eat bugs with its leaves. The moment a bug sets off the trap in the mouth of the plant, it closes and traps it. Next it will start the digestion process which will help the plant receive the necessary minerals. The recommended method to start growing on the tevaplanter is replanting and it's best to keep a bit of the original soil on the roots and cover with moss (dry or alive) its important to note that this plant does not need fertilizer at all, fertilizer may damage the roots. During winters, this plant needs to go into dormancy and during these periods you must stop watering completely. An experienced grower is recommended.
Expert
Placement
Mid part
Growth Speed
1-2 Month
Partial sun -
Full sun
68ºF (20ºC) to
95ºF (35ºC)
Never Fertilize
Venus flytrap grows in swamp areas without salts or minerals. In order to supplement the missing minerals the plant evolved to eat bugs with its leaves. The moment a bug sets off the trap in the mouth of the plant, it closes and traps it. Next it will start the digestion process which will help the plant receive the necessary minerals. The recommended method to start growing on the tevaplanter is replanting and it's best to keep a bit of the original soil on the roots and cover with moss (dry or alive) its important to note that this plant does not need fertilizer at all, fertilizer may damage the roots. During winters, this plant needs to go into dormancy and during these periods you must stop watering completely. An experienced grower is recommended.
i
Lace Flower Vine
Lace Flower Vine
Alsobia dianthiflora
Growing Method
The Lace flower vine is a creeping plant originally from Central and South America. It is possible to start growing an Alsobia on the tevaplanter with three different methods; replanting, mother plant or cuttings. Cuttings would be the most difficult method to start with. If you choose to use the cutting method, we recommend cutting a long piece which has roots showing. This plant does not need much water and it would be good to let the water level drop, which gives the roots time to dry. This plant has nice white flowers which blooms often in the good lighting condition
For Experience Growers
Placement
Mid part
Growth Speed
1-2 Month
Partial shade
58ºF (14ºC) to
78ºF (25ºC)
Fertilize once
a month
The Lace flower vine is a creeping plant originally from Central and South America. It is possible to start growing an Alsobia on the tevaplanter with three different methods; replanting, mother plant or cuttings. Cuttings would be the most difficult method to start with. If you choose to use the cutting method, we recommend cutting a long piece which has roots showing. This plant does not need much water and it would be good to let the water level drop, which gives the roots time to dry. This plant has nice white flowers which blooms often in the good lighting condition
i
Creeping Fig
Creeping fig
Ficus pumila
Growing Method
Ficus pumila is a climbing plant which grows roots along the stem. Pumila means dwarf and the name is in reference to the size of the leaves, in fact this plant could cover an entire wall over time and will need pruning on the tevaplanter after a period. The plant originates from East Asia and prefers to grow in a humid environment. From our experience, we recommend to let the water level in the vessel drop to allow roots to dry out. After the plant has taken root, it is even possible to leave the vessel partially full. Grow in a bright and airy place. A really nice and beautiful plant.
For Experience Growers
Placement
Low-Mid part
Growth Speed
1-2 Month
Bright light
55ºF (13ºC) to
75ºF (24ºC)
Fertilize once
a month
Ficus pumila is a climbing plant which grows roots along the stem. Pumila means dwarf and the name is in reference to the size of the leaves, in fact this plant could cover an entire wall over time and will need pruning on the tevaplanter after a period. The plant originates from East Asia and prefers to grow in a humid environment. From our experience, we recommend to let the water level in the vessel drop to allow roots to dry out. After the plant has taken root, it is even possible to leave the vessel partially full. Grow in a bright and airy place. A really nice and beautiful plant.
i
Staghorn Fern
Staghorn Fern
Platycerium superbum
Growing Method
The Platycerium superbum comes from the staghorn fern family and is one of the coolest plants! In the wild it grows on tree trunks, they grow into very large plants, much larger than the tevaplanter. We planted a small one as an experiment, it was interesting to see how it grew on the tevaplanter over the years. During the year, the plants have an active period for growth and a stagnant period for rest. During the growing period the plant needs more water and fertilizer, so you should keep in mind to fill the vessel more often.
For Experience Growers
Placement
Growth Speed
3-4 Month
Partial shade-
Bright light
55ºF (13ºC) to
85ºF (30ºC)
Fertilize once
a month
The Platycerium superbum comes from the staghorn fern family and is one of the coolest plants! In the wild it grows on tree trunks, they grow into very large plants, much larger than the tevaplanter. We planted a small one as an experiment, it was interesting to see how it grew on the tevaplanter over the years. During the year, the plants have an active period for growth and a stagnant period for rest. During the growing period the plant needs more water and fertilizer, so you should keep in mind to fill the vessel more often.
i
Wax Plant
Wax Plant
Hoya lacunosa
Growing Method
In the wild Hoya plants grow on the trees, climbing along the stem and taking root in different places. The Hoya family is very diverse, we chose to grow Hoya lacunosa as it has small leaves which suits the shape of the tevaplanter. We recommend to start growing a Hoya plant from cuttings or the mother-plant methods. If you chose to grow through cuttings, make sure to cut a long stem and if there are root tips showing it will be much easier and faster for the plant to grow and take hold of the vessel. Make sure to place the plant in a very lit area with short periods of direct sunlight. It is really easy but requires patience, nature has its own time.
For Experience Growers
Placement
Growth Speed
Partial shade-
Bright light
68ºF (20ºC) to
78ºF (25ºC)
Fertilize
every 2 weeks
In the wild Hoya plants grow on the trees, climbing along the stem and taking root in different places. The Hoya family is very diverse, we chose to grow Hoya lacunosa as it has small leaves which suits the shape of the tevaplanter. We recommend to start growing a Hoya plant from cuttings or the mother-plant methods. If you chose to grow through cuttings, make sure to cut a long stem and if there are root tips showing it will be much easier and faster for the plant to grow and take hold of the vessel. Make sure to place the plant in a very lit area with short periods of direct sunlight. It is really easy but requires patience, nature has its own time.
i
Silver Lace Fern
Silver Lace Fern
Pteris Quadriaurita
Growing Method
This plant comes from Southeast Asia, in nature it grows in a tropical & sub-tropical environment and is very suitable to grow indoors. This ferns roots likes constant moisture therefor we recommend to plant it at the lower/mid part of the vessel and always make sure that the vessel never completely dries out. The first period after planting is a delicate period and requires patience to see success. The plant takes time to recover from the transition and to get used to its new home. After a few months it will start to grow roots on the surface and will become bigger & stronger.
For Experience Growers
Placement
mid part
Growth Speed
1-2 Months
Partial shade
58ºF (14ºC) to
78ºF (25ºC)
Fertilize once
a month
This plant comes from Southeast Asia, in nature it grows in a tropical & sub-tropical environment and is very suitable to grow indoors. This ferns roots likes constant moisture therefor we recommend to plant it at the lower/mid part of the vessel and always make sure that the vessel never completely dries out. The first period after planting is a delicate period and requires patience to see success. The plant takes time to recover from the transition and to get used to its new home. After a few months it will start to grow roots on the surface and will become bigger & stronger.
i
English Ivy
English Ivy
Hedera helix
Growing Method
English ivy is a hardy, climbing plant known for its air cleaning qualities. it’s a slow grower but once established can grow pretty quickly. It can handle almost any lighting but would appreciate bright light with a bit of early morning sun. It’s best to place the English ivy in the lower-mid part of the tevaplanter and start growing it with the mother plant method. This plant will grow very large and will need pruning.
For Experience Growers
Placement
Growth Speed
2-3 Months
Partial shade -
bright light
50ºF (10ºC) to
80ºF (26ºC)
Fertilize once
a month
English ivy is a hardy, climbing plant known for its air cleaning qualities. it’s a slow grower but once established can grow pretty quickly. It can handle almost any lighting but would appreciate bright light with a bit of early morning sun. It’s best to place the English ivy in the lower-mid part of the tevaplanter and start growing it with the mother plant method. This plant will grow very large and will need pruning.
i
Ficus bonsai
Ficus bonsai
Ficus microcarpa
Growing Method
In nature you can find these Ficus bonsai trees growing everywhere, on rocks and even on other trees. For this reason we decided to test it on the tevaplanter. We recommend growing this Ficus for anyone, even beginners. When mounting the Ficus to the tevaplanter, we recommend cutting most of the small roots so that new ones can grow directly onto the vessels surface. Once the Ficus roots itself on the tevaplanter surface, its roots will start to wrap around the vessel and creates a unique look over time. It is important to note that this plant requires a lot of light and even direct sunlight for a period of time.
Beginner
Placement
Growth Speed
2-3 Months
Partial shade -
bright light
50ºF (10ºC) to
80ºF (26ºC)
Fertilize once
a month
In nature you can find these Ficus bonsai trees growing everywhere, on rocks and even on other trees. For this reason we decided to test it on the tevaplanter. We recommend growing this Ficus for anyone, even beginners. When mounting the Ficus to the tevaplanter, we recommend cutting most of the small roots so that new ones can grow directly onto the vessels surface. Once the Ficus roots itself on the tevaplanter surface, its roots will start to wrap around the vessel and creates a unique look over time. It is important to note that this plant requires a lot of light and even direct sunlight for a period of time.
i
Hooded Orchid
Hooded Orchid
Dendrobium aphyllum
Growing Method
Originating in Australia and unlike most orchids, it is suitable for growing outside of a greenhouse, it loves strong lighting and will be happy to get morning or afternoon sunlight. It is recommended to plant the dendrobium in the upper middle part of the tevaplanter to avoid excessive watering, and although it is an orchid that does not require a greenhouse it is advised to pamper the plant by spraying water to raise the moisture around it. It is recommended to fertilize once every two to three weeks during the growing season. We keep the water level inside the tevaplanter low for most of the time, to let the roots stay moist without being too wet or too dry. It is important to note that epiphytic orchids are slightly more difficult and a slower grow than most other plants, so those with experience or desire to learn about proper care are recommended.
Expert
Placement
mid-upper
Growth speed
3-4 months
Bright light -
partial sun
60ºF (15ºC) to
90ºF (32ºC)
Fertilize every
2-3 weeks
Originating in Australia and unlike most orchids, it is suitable for growing outside of a greenhouse, it loves strong lighting and will be happy to get morning or afternoon sunlight. It is recommended to plant the dendrobium in the upper middle part of the tevaplanter to avoid excessive watering, and although it is an orchid that does not require a greenhouse it is advised to pamper the plant by spraying water to raise the moisture around it. It is recommended to fertilize once every two to three weeks during the growing season. We keep the water level inside the tevaplanter low for most of the time, to let the roots stay moist without being too wet or too dry. It is important to note that epiphytic orchids are slightly more difficult and a slower grow than most other plants, so those with experience or desire to learn about proper care are recommended.
i
African Violets
African Violets
Streptocarpus sect. Saintpaulia
Growing Method
African violet comes from the high rainforests of East Africa, where it grows in the shade of other plants and the humidity conditions are high. In nature the African violet grows in moist soil and even on rock surfaces. The key to a thriving African violet on the tevaplanter is to keep the surface moist and the leaves dry. Although it is a plant adapted to shade, it is recommended to place in a very bright area without direct sunlight to encourage flowering. It should be fertilized every other week to accelerate growth during the growing season to preserve the color of the leaves and encourage flowering. You can start growing African violets on the tevaplanter by either leaf cuttings (slow process) or replanting.
For Experience Growers
Placement
mid part
Growth speed
2-3 months
Bright light
60ºF (15ºC) to
80ºF (26ºC)
Fertilize every
other week
African violet comes from the high rainforests of East Africa, where it grows in the shade of other plants and the humidity conditions are high. In nature the African violet grows in moist soil and even on rock surfaces. The key to a thriving African violet on the tevaplanter is to keep the surface moist and the leaves dry. Although it is a plant adapted to shade, it is recommended to place in a very bright area without direct sunlight to encourage flowering. It should be fertilized every other week to accelerate growth during the growing season to preserve the color of the leaves and encourage flowering. You can start growing African violets on the tevaplanter by either leaf cuttings (slow process) or replanting.
i
Barbosella orchid
Barbosella orchid
Growing Method
Barbosella orchids come from Central and South America and most of them love high humidity, low temperatures and medium light. We have good experience growing the Barbosella orchids on the tevaplanter vessel. It’s recommended to mount them on the mid-upper part of the vessel. This orchid appreciates humid environments but also spraying it from time to time will do the job. It is a very small and slow growing plant which is why we grew the Barbosella on the tevaplanter vessel with other suitable plants, which created a diverse and beautiful result.
Expert
Placement
mid-upper
Growth speed
3-4 months
Partial shade
15ºF (-9ºC) to
85ºF (30ºC)
Fertilize
every 2 weeks
Barbosella orchids come from Central and South America and most of them love high humidity, low temperatures and medium light. We have good experience growing the Barbosella orchids on the tevaplanter vessel. It’s recommended to mount them on the mid-upper part of the vessel. This orchid appreciates humid environments but also spraying it from time to time will do the job. It is a very small and slow growing plant which is why we grew the Barbosella on the tevaplanter vessel with other suitable plants, which created a diverse and beautiful result.
i
Pilea glauca
Pilea glauca
Pilea libanensis
Growing Method
Pilea glauca is an evergreen plant with small, dense leaves that usually grow in hanging pots. In nature the Pilea glauca grows in humid locations, loves strong lighting and can withstand two to three hours of direct sunlight in the morning or evening. It’s advisable to plant on the central-lower part of the tevaplanter. With good lighting conditions the plant will spread and cover most of the vessel. It is best to use the replanting method and place the Pilea glauca all around the vessel by using more than one plant. It is recommended to prune long branches for maintaining a neat and full appearance while encourage new growth.
Expert
Placement
Low-Mid
Growth speed
2-3 months
Partial shade-
bright light
55ºF (13ºC) to
80ºF (26ºC)
Fertilize every
2-3 weeks
Pilea glauca is an evergreen plant with small, dense leaves that usually grow in hanging pots. In nature the Pilea glauca grows in humid locations, loves strong lighting and can withstand two to three hours of direct sunlight in the morning or evening. It’s advisable to plant on the central-lower part of the tevaplanter. With good lighting conditions the plant will spread and cover most of the vessel. It is best to use the replanting method and place the Pilea glauca all around the vessel by using more than one plant. It is recommended to prune long branches for maintaining a neat and full appearance while encourage new growth.
i
Masdevallia orchid
Masdevallia orchid
Growing Method
There are many types of Masdevallia orchids, with flowers in very diverse colors and sizes. Growing a Masdevallia orchid is recommended for expert growers - these orchids roots do not like to dry out but are also sensitive to excessive water, it’s best to mount these orchids on the central-upper part of the vessel and let the water level drop periodically. In terms of lighting, Masdevallia loves bright light without exposure to direct sunlight. It is recommended to fertilize every two weeks during the growing season. The Masdevallia is also sensitive to dry & hot environments, so it is also recommended to spray the leaves with water from time to time.
Expert
Placement
mid-upper
Growth speed
3-4 months
Partial shade-
Bright light
50ºF (10ºC) to
80ºF (26ºC)
Fertilize every
2 weeks
There are many types of Masdevallia orchids, with flowers in very diverse colors and sizes. Growing a Masdevallia orchid is recommended for expert growers - these orchids roots do not like to dry out but are also sensitive to excessive water, it’s best to mount these orchids on the central-upper part of the vessel and let the water level drop periodically. In terms of lighting, Masdevallia loves bright light without exposure to direct sunlight. It is recommended to fertilize every two weeks during the growing season. The Masdevallia is also sensitive to dry & hot environments, so it is also recommended to spray the leaves with water from time to time.
i
Butterworts
Butterworts
Pinguicula sp
Growing Method
A carnivorous plant that originated in the northern hemisphere. The leaves are sticky and works to catch small insects, which it breaks down for nourishment. The Pinguicula can be found growing on wet rocks as well as lower parts of trees, making it suitable to grow on the tevaplanter vessel. The Pinguicula will bloom profusely throughout most of the year. It is recommended to plant the Pinguicula in the middle-bottom part of the vessel to provide it with the suitable moist conditions necessary and to leave some of the soil around the roots. We leave some soil on the roots to prevent trauma and to increase the plants success. No need to fertilize, insects are all your Pinguicula needs. One thing we found while growing the Pinguicula is that the roots are very thin and gentle and it takes time for the plant to get strong enough to hold itself onto the vessel. To resolve this we recommend to attached the Pinguicula with fish line to make sure the plant is held tight onto the vessel for a long enough period of time.
Expert
Placement
low-mid
Growth Speed
2-3 months
Partial sun
55ºF (13ºC) to
85ºF (30ºC)
Never Fertilize
A carnivorous plant that originated in the northern hemisphere. The leaves are sticky and works to catch small insects, which it breaks down for nourishment. The Pinguicula can be found growing on wet rocks as well as lower parts of trees, making it suitable to grow on the tevaplanter vessel. The Pinguicula will bloom profusely throughout most of the year. It is recommended to plant the Pinguicula in the middle-bottom part of the vessel to provide it with the suitable moist conditions necessary and to leave some of the soil around the roots. We leave some soil on the roots to prevent trauma and to increase the plants success. No need to fertilize, insects are all your Pinguicula needs. One thing we found while growing the Pinguicula is that the roots are very thin and gentle and it takes time for the plant to get strong enough to hold itself onto the vessel. To resolve this we recommend to attached the Pinguicula with fish line to make sure the plant is held tight onto the vessel for a long enough period of time.
i
Rabbit Foot Fern
Rabbit Foot Fern
Davallia Fejeensis
Growing Method
The Rabbit foot fern is a creeping fern native to Fiji. It can handle a wide range of temperature from cool to hot. Its a plant that enjoys partial to full shade lighting. There are two methods to start growing the Rabbit foot fern on the Tevaplanter vessel; replanting and cuttings. For the fastest and easiest grow we recommend to mount your Rabbit foot fern with the replanting method. It will take a few months for the plant to establish itself to grab hold and start growing but with time the plant will grow and cover the entire vessel. As with most ferns, it is necessary to not let the vessel completely dry out.
For Experience Growers
Placement
Mid-Upper
Growth Speed
6+ Months
Partial shade-
Bright light
60ºF to (15ºC)
80ºF (26ºC)
Fertilize every
2-3 Weeks
The Rabbit foot fern is a creeping fern native to Fiji. It can handle a wide range of temperature from cool to hot. Its a plant that enjoys partial to full shade lighting. There are two methods to start growing the Rabbit foot fern on the tevaplanter vessel; replanting and cuttings. For the fastest and easiest grow we recommend to mount your Rabbit foot fern with the replanting method. It will take a few months for the plant to establish itself to grab hold and start growing but with time the plant will grow and cover the entire vessel. As with most ferns, it is necessary to not let the vessel completely dry out.
i
Begonia schulzei
Begonia schulzei
Growing Method
Begonia Schultzei is a creeping Begonia originating from Africa. This plant is especially fond of by terrarium growers. It is not an easy plant to grow at home due to its sensitivity for dry environments. It is recommended to plant this Begonia on the lower-mid part of the vessel, with time it will cover the entire surface. It is recommended to fertilize every other week during its growing period.
Expert
Placement
Mid-Upper
Growth Speed
6+ Months
Partial shade-
Bright light
60ºF to (15ºC)
80ºF (26ºC)
Fertilize every
2-3 Weeks
Begonia Schultzei is a creeping Begonia originating from Africa. This plant is especially fond of by terrarium growers. It is not an easy plant to grow at home due to its sensitivity for dry environments. It is recommended to plant this Begonia on the lower-mid part of the vessel, with time it will cover the entire surface. It is recommended to fertilize every other week during its growing period.
i
Amaranthus
Amaranthus
Amaranthus viridis
Growing Method
The Aamaranthus are commonly referred to as pigweeds and have very beautiful purple spouts. We grow these plants mainly for sprouting purposes due to its very quick and beautiful process. Its a very nice development to watch the growing cycle from seeds to plants which is also educational to kids. The method used to start sprouting on the tevaplanter is by sowing and the entire life cycle will be around 2-3 weeks
Beginner
Placement
Mid-Upper
Growth Speed
6+ Months
Partial shade-
Bright light
60ºF to (15ºC)
80ºF (26ºC)
Fertilize every
2-3 Weeks
The Aamaranthus are commonly referred to as pigweeds and have very beautiful purple spouts. We grow these plants mainly for sprouting purposes due to its very quick and beautiful process. Its a very nice development to watch the growing cycle from seeds to plants which is also educational to kids. The method used to start sprouting on the tevaplanter is by sowing and the entire life cycle will be around 2-3 weeks.
i
Begonia Tiger Paw
Begonia Tiger Paw
Rhizomatous Begonia
Growing Method
The Tiger paw is a beautiful begonia which you can start growing on your tevaplanter vessel with two methods, replanting and leaf cuttings. Leafe cuttings is an interesting method to start from but can take many months to develop into a mature plant. We recommend to find a small plant and gently replant it on the low-mid part of the vessel. The plant may go into shock for the first month or two after replanting but with time it will acclimate to its new home. Begonias are tropical and sub-tropical plants that usually needs high humidity in the air and a warm environment. Not recommended for beginners.
For Experience Growers
Placement
Mid-Upper
Growth Speed
6+ Months
Partial shade-
Bright light
60ºF to (15ºC)
80ºF (26ºC)
Fertilize every
2-3 Weeks
The Tiger paw is a beautiful begonia which you can start growing on your tevaplanter vessel with two methods, replanting and leaf cuttings. Leafe cuttings is an interesting method to start from but can take many months to develop into a mature plant. We recommend to find a small plant and gently replant it on the low-mid part of the vessel. The plant may go into shock for the first month or two after replanting but with time it will acclimate to its new home. Begonias are tropical and sub-tropical plants that usually needs high humidity in the air and a warm environment. Not recommended for beginners.
i
Cretan Brake
Cretan Brake
Pteris cretica
Growing Method
The Cretan brake is an easy to grow plant, native to Europe, Asia and Africa. This ferns roots likes constant moisture therefor we recommend to plant it at the lower/mid part of the vessel and always make sure that the vessel never completely dries out. The first period after planting is a delicate period and requires patience to see success. The plant takes time to recover from the transition and to get used to its new home. After a few months it will start to grow roots on the surface and will become bigger & stronger.
For Experience Growers
Placement
Mid-Upper
Growth Speed
6+ Months
Partial shade-
Bright light
60ºF to (15ºC)
80ºF (26ºC)
Fertilize every
2-3 Weeks
The Cretan brake is an easy to grow plant, native to Europe, Asia and Africa. This ferns roots likes constant moisture therefor we recommend to plant it at the lower/mid part of the vessel and always make sure that the vessel never completely dries out. The first period after planting is a delicate period and requires patience to see success. The plant takes time to recover from the transition and to get used to its new home. After a few months it will start to grow roots on the surface and will become bigger & stronger.
i
Lemon Button
Lemon Button
Nephrolepis cordifolia “Duffii”
Growing Method
Nephrolepis cordifolia "Duffii" / Lemon button fern - Suitable for a variety of lighting conditions; from shade to a gentle morning or afternoon sun as well as direct bright light. A lover of moisture and irrigation but can thrive as well in average humidity. Very suitable for planting on the tevaplanter, you can plant a mature plant or several plugs for a lush look in a short amount of time. It is recommended to plant in the central-lower part of the vessel, from where it will climb upwards until it reaches full coverage. To maintain the full and fresh look, make sure to provide your lemon button fern with fertilizer once a month.
For Experience Growers
Placement
Mid-Upper
Growth speed
2-3 months
Bright light
55ºF to (13ºC)
80ºF (26ºC)
Fertilize once
a month
Nephrolepis cordifolia "Duffii" / Lemon button fern - Suitable for a variety of lighting conditions; from shade to a gentle morning or afternoon sun as well as direct bright light. A lover of moisture and irrigation but can thrive as well in average humidity. Very suitable for planting on the tevaplanter, you can plant a mature plant or several plugs for a lush look in a short amount of time. It is recommended to plant in the central-lower part of the vessel, from where it will climb upwards until it reaches full coverage. To maintain the full and fresh look, make sure to provide your lemon button fern with fertilizer once a month.
i
Lingua Yabane
Lingua fu
Growing Method
The Lingua fu is a very slow growing creeping fern, native to Asia and requires a more experience grower. This ferns roots likes constant moisture therefor we recommend to plant it at the lower/mid part of the vessel and always make sure that the vessel never completely dries out. The first period after replanting is a delicate period and requires patience to see success. The plant takes time to recover from the transition and to get used to its new home. After a few months it will start to grow roots on the surface and will become bigger & stronger.
Expert
Placement
Mid-Upper
Growth Speed
6+ Months
Partial shade-
Bright light
60ºF to (15ºC)
80ºF (26ºC)
Fertilize every
2-3 Weeks
The Lingua fu is a very slow growing creeping fern, native to Asia and requires a more experience grower. This ferns roots likes constant moisture therefor we recommend to plant it at the lower/mid part of the vessel and always make sure that the vessel never completely dries out. The first period after replanting is a delicate period and requires patience to see success. The plant takes time to recover from the transition and to get used to its new home. After a few months it will start to grow roots on the surface and will become bigger & stronger.
i
Neoregelia sp
Neoregelia sp
Bromelioideae
Growing Method
Neoregelias sp is part of the Bromeliad family which comes in a large variety of all kinds of shapes, sizes and colors. The Bromeliad as well as the Neoregelias sp are an epiphytic plant which you can find growing on trees. The Bromeliad usually do not grow in soil which means its roots needs to be exposed to air. They are a very good fit for the tevaplanter, the first period after replanting is the most probelamtic time for the plant. It may take a long time until the plant grows new roots (sometimes it can take even a few months). We recommend to mount the Bromeliad with the cutting method as we saw the best progress but replanting is another great and easy option. *Tip* Choose a plant that is showing the beggining of a new growth, it will root much quicker.
For Experience Growers
Placement
Mid-Upper
Growth Speed
6+ Months
Partial shade-
Bright light
60ºF to (15ºC)
80ºF (26ºC)
Fertilize every
2-3 Weeks
Neoregelias sp is part of the Bromeliad family which comes in a large variety of all kinds of shapes, sizes and colors. The Bromeliad as well as the Neoregelias sp are an epiphytic plant which you can find growing on trees. The Bromeliad usually do not grow in soil which means its roots needs to be exposed to air. They are a very good fit for the tevaplanter, the first period after replanting is the most probelamtic time for the plant. It may take a long time until the plant grows new roots (sometimes it can take even a few months). We recommend to mount the Bromeliad with the cutting method as we saw the best progress but replanting is another great and easy option. *Tip* Choose a plant that is showing the beggining of a new growth, it will root much quicker.
i
Gold Dollar orchid
Paphiopedilum Gold Dollar
Growing Method
The Paphiopedilum (Lady slipper) orchid is a very beautiful family of orchids. In general, orchids are hard to grow but if you are an orchid enthusiast we recommend to try growing a Paphiopedilum. Out of all the Orchids we grew, we had the best results and easiest time growing the Paphiopedilum on the tevaplanter. Its important to choose a healthy plant with a good root system to improve the success of your growth. *Tip* Choose a plant that is showing the beginning of a new plant growth, when orchids grow a new plant they will start growing new roots as well. This is the only time new roots will grow, otherwise it can take months until the plant will develop a healthy root system.
For Experience Growers
Placement
Mid-Upper
Growth Speed
6+ Months
Partial shade-
Bright light
60ºF to (15ºC)
80ºF (26ºC)
Fertilize every
2-3 Weeks
The Paphiopedilum (Lady slipper) orchid is a very beautiful family of orchids. In general, orchids are hard to grow but if you are an orchid enthusiast we recommend to try growing a Paphiopedilum. Out of all the Orchids we grew, we had the best results and easiest time growing the Paphiopedilum on the tevaplanter. Its important to choose a healthy plant with a good root system to improve the success of your growth. *Tip* Choose a plant that is showing the beginning of a new plant growth, when orchids grow a new plant they will start growing new roots as well. This is the only time new roots will grow, otherwise it can take months until the plant will develop a healthy root system.
i
Philodendron narrow
Philodendron narrow
Growing Method
We start to grow our philadendrun from a very small plug. Its much easier to start growing from a small plant on the tevaplanter and also when starting with a small plant, it grows relative to the shape of the vessel. Philodendrons are native to south america and can be found in rainforests, swamps and along riverbanks which is why the tevaplanter is a perfect fit. It's an easy to grow plant for indoors, with time it will grow into a large plant and will be a beautiful and unuiqe decor in any living space.
For Experience Growers
Placement
Mid-Upper
Growth Speed
6+ Months
Partial shade-
Bright light
60ºF to (15ºC)
80ºF (26ºC)
Fertilize every
2-3 Weeks
We start to grow our philadendrun from a very small plug. Its much easier to start growing from a small plant on the tevaplanter and also when starting with a small plant, it grows relative to the shape of the vessel. Philodendrons are native to south america and can be found in rainforests, swamps and along riverbanks which is why the tevaplanter is a perfect fit. It's an easy to grow plant for indoors, with time it will grow into a large plant and will be a beautiful and unuiqe decor in any living space.
i
Philodendron micans
Philodendron micans
Philodendron hederaceum
Growing Method
The Philodendron micans is a very beautiful plant which has velvety heart shaped leaves. This plant enjoys bright indirect light as well as high humidity in its enviorment. You can start growing it on your tevaplanter vessel by three different methods: stem cutting, replanting and mother planting. If you start from stem cuttings, make sure to cut a long enough piece with root tips showing from the hips. The Philodendron micans enjoys a wet surface, so mounting it on the lower/middle section of your vessel would be best for a great and successful growing experience.
For Experience Growers
Placement
Mid-Upper
Growth Speed
6+ Months
Partial shade-
Bright light
60ºF to (15ºC)
80ºF (26ºC)
Fertilize every
2-3 Weeks
The Philodendron micans is a very beautiful plant which has velvety heart shaped leaves. This plant enjoys bright indirect light as well as high humidity in its enviorment. You can start growing it on your tevaplanter vessel by three different methods: stem cutting, replanting and mother planting. If you start from stem cuttings, make sure to cut a long enough piece with root tips showing from the hips. The Philodendron micans enjoys a wet surface, so mounting it on the lower/middle section of your vessel would be best for a great and successful growing experience.
i
Raphidophora tetraspema
Raphidophora tetraspema
Growing Method
On this tevaplanter we mounted 3 different plants together: Monstera adansonii, Raphidophora tetraspema and a Epipremnum aureum Njoy. The Epipremnum aureum Njoy did not fair so well on the tevaplanter during our testing but the Monstera adansonii & Raphidophora tetraspema took very well to its new home. These plants becomes large with time, much larger in proportion to the tevaplanter which may not be to everyone's liking. These plants enjoy a lot of water and a good amount of bright indirect light. You can start your grow by replanting from a young plant or by stem cuttings.
For Experience Growers
Placement
Mid-Upper
Growth Speed
6+ Months
Partial shade-
Bright light
60ºF to (15ºC)
80ºF (26ºC)
Fertilize every
2-3 Weeks
On this tevaplanter we mounted 3 different plants together: Monstera adansonii, Raphidophora tetraspema and a Epipremnum aureum Njoy. The Epipremnum aureum Njoy did not fair so well on the tevaplanter during our testing but the Monstera adansonii & Raphidophora tetraspema took very well to its new home. These plants becomes large with time, much larger in proportion to the tevaplanter which may not be to everyones liking. These plants enjoy a lot of water and a good amount of bright indirect light. You can start your grow by replanting from a young plant or by stem cuttings.
i
Monstera adansonii
Monstera adansonii
Growing Method
On this tevaplanter we mounted 3 different plants together: Monstera adansonii, Raphidophora tetraspema and a Epipremnum aureum Njoy. The Epipremnum aureum Njoy did not fair so well on the tevaplanter during our testing but the Monstera adansonii & Raphidophora tetraspema took very well to its new home. These plants becomes large with time, much larger in proportion to the tevaplanter which may not be to everyone's liking. These plants enjoy a lot of water and a good amount of bright indirect light. You can start your grow by replanting from a young plant or by stem cuttings.
For Experience Growers
Placement
Mid-Upper
Growth Speed
6+ Months
Partial shade-
Bright light
60ºF to (15ºC)
80ºF (26ºC)
Fertilize every
2-3 Weeks
On this tevaplanter we mounted 3 different plants together: Monstera adansonii, Raphidophora tetraspema and a Epipremnum aureum Njoy. The Epipremnum aureum Njoy did not fair so well on the tevaplanter during our testing but the Monstera adansonii & Raphidophora tetraspema took very well to its new home. These plants becomes large with time, much larger in proportion to the tevaplanter which may not be to everyones liking. These plants enjoy a lot of water and a good amount of bright indirect light. You can start your grow by replanting from a young plant or by stem cuttings.
i
Dwarf Umbrella Tree
Dwarf umbrella tree
Schefflera
Growing Method
The Shefflera is a very big bush/tree, we actually tested it on the tevaplanter by accident. We found a small piece growing and decided to mount it on the tevaplanter surface and see what comes of it. Its roots have wrapped around the tevaplanter pretty fast and the plant itself looks very nice on the vessel. You can find many different types of Shefflera, start by growing with the replanting method with a very small plant or with the stem cutting method after water propagation. The plant enjoys lots of bright light / direct sunlight so let it shine :)
Beginner
Placement
Mid-Upper
Growth Speed
6+ Months
Partial shade-
Bright light
60ºF to (15ºC)
80ºF (26ºC)
Fertilize every
2-3 Weeks
The Shefflera is a very big bush/tree, we actually tested it on the tevaplanter by accident. We found a small piece growing and decided to mount it on the tevaplanter surface and see what comes of it. Its roots have wrapped around the tevaplanter pretty fast and the plant itself looks very nice on the vessel. You can find many different types of Shefflera, start by growing with the replanting method with a very small plant or with the stem cutting method after water propagation. The plant enjoys lots of bright light / direct sunlight so let it shine :)
i
Watercress
Watercress
Rorippa nasturtium-aquaticum
Growing Method
Watercress commonly referred to as cress, is easy to grow and looks gorgeous when the vessel is covered with its sprouts. We grow these plants mainly for sprouting purposes due to its very quick and beautiful process. Its a very nice development to watch the growing cycle from seeds to plants which is also educational to kids. The method used to start sprouting on the tevaplanter is by sowing and the entire life cycle will be around 2-3 weeks.
Beginner
Placement
Mid-Upper
Growth Speed
6+ Months
Partial shade-
Bright light
60ºF to (15ºC)
80ºF (26ºC)
Fertilize every
2-3 Weeks
Watercress commonly referred to as cress, is easy to grow and looks gorgeous when the vessel is covered with its sprouts. We grow these plants mainly for sprouting purposes due to its very quick and beautiful process. Its a very nice development to watch the growing cycle from seeds to plants which is also educational to kids. The method used to start sprouting on the tevaplanter is by sowing and the entire life cycle will be around 2-3 weeks.
i
Begonia mazae
Begonia mazae
Growing Method
We grew a few types of Begonias and this Begonia mazae was one of the easiest Begonia for us to grow on the tevaplanter. This type of begonia is more like a miniature plant where it won't grow very big and will grow relatively fast. Its important to give it time in the beginning to recover from the initial replanting shock. It's also important to place the vessel in a well lit area with a bit of direct sunlight.
For Experience Growers
Placement
Mid-Upper
Growth Speed
6+ Months
Partial shade-
Bright light
60ºF to (15ºC)
80ºF (26ºC)
Fertilize every
2-3 Weeks
We grew a few types of Begonias and this Begonia mazae was one of the easiest Begonia for us to grow on the tevaplanter. This type of begonia is more like a miniature plant where it won't grow very big and will grow relatively fast. Its important to give it time in the beginning to recover from the initial replanting shock. It's also important to place the vessel in a well lit area with a bit of direct sunlight.
i
Birds nest fern
Birds nest fern
Growing Method
The Bird's nest fern is native to Asia, Australia, Africa and can be found in the rainforest's growing high up on trees. Healthy plant leaves can grow up to 5 feet long but when grown indoors they usually grow to about 2 feet long. We recommend to find a small plant plug to start growing the Bird's nest fern on the tevaplanter. The Bird's nest fern enjoys well lit areas with moderate amount of shade. As with most ferns, they like to have consistent water so we recommend to mount the plant on the lower-mid section of the vessel and to keep the water level high. We really loved how well it grew on the tevaplanter and we recommend this plant for anyone interested.
For Experience Growers
Placement
Mid-Upper
Growth Speed
6+ Months
Partial shade-
Bright light
60ºF to (15ºC)
80ºF (26ºC)
Fertilize every
2-3 Weeks
The Bird's nest fern is native to Asia, Australia, Africa and can be found in the rainforest's growing high up on trees. Healthy plant leaves can grow up to 5 feet long but when grown indoors they usually grow to about 2 feet long. We recommend to find a small plant plug to start growing the Bird's nest fern on the tevaplanter. The Bird's nest fern enjoys well lit areas with moderate amount of shade. As with most ferns, they like to have consistent water so we recommend to mount the plant on the lower-mid section of the vessel and to keep the water level high. We really loved how well it grew on the tevaplanter and we recommend this plant for anyone interested.
i
Button fern
Button fern
Pellaea rotundifolia
Growing Method
This ferns roots likes constant moisture therefor we recommend to plant it at the lower/mid part of the vessel and always make sure that the vessel never completely dries out. The first period after replanting is a delicate period and requires patience to see success. The plant takes time to recover from the transition and to get used to its new home. After a few months it will start to grow roots on the surface and will become bigger & stronger.
For Experience Growers
Placement
Mid-Upper
Growth Speed
1+ Years
Partial shade-
Bright light
60ºF to (15ºC)
80ºF (26ºC)
Fertilize every
2-3 Weeks
This ferns roots likes constant moisture therefor we recommend to plant it at the lower/mid part of the vessel and always make sure that the vessel never completely dries out. The first period after replanting is a delicate period and requires patience to see success. The plant takes time to recover from the transition and to get used to its new home. After a few months it will start to grow roots on the surface and will become bigger & stronger.
i
Dendrobium kingianum
Dendrobium kingianum
Growing Method
Dendrobium kingianum - Pink rock orchid - An orchid native to the east coast of Australia, where it grows near riverbanks on moist rocks. This Orchid is relatively durable, which in its natural environment is also exposed to direct sunlight, dryness and heat - although it will prefer a humid environment, comfortable temperatures and exposure only to gentle morning or afternoon sun. All of these make it a highly recommended plant for growing on the Tevaplanter, simulating a rocky and moist environment. Another fact that makes the kingpin a lovable orchid for growers is its lush blooms throughout spring. It is recommended to mount the plant in the central-lower part of the vessel, and fertilize once every two to three weeks. Keeping the vessel with minimal water (quarter of the vessel filled) at all times is best for this plant. Orchids do not grow roots all year round, so after mounting this Orchid months can pass before you may see new roots growing. Although it is a highly durable orchid that can survive in a variety of conditions, maintaining optimal conditions will help keep the plant beautiful and healthy, and will encourage flowering.
For Experience Growers
Placement
Mid-Upper
Growth Speed
6+ Months
Partial shade-
Bright light
60ºF to (15ºC)
80ºF (26ºC)
Fertilize every
2-3 Weeks
Dendrobium kingianum - Pink rock orchid - An orchid native to the east coast of Australia, where it grows near riverbanks on moist rocks. This Orchid is relatively durable, which in its natural environment is also exposed to direct sunlight, dryness and heat - although it will prefer a humid environment, comfortable temperatures and exposure only to gentle morning or afternoon sun. All of these make it a highly recommended plant for growing on the Tevaplanter, simulating a rocky and moist environment. Another fact that makes the kingpin a lovable orchid for growers is its lush blooms throughout spring. It is recommended to mount the plant in the central-lower part of the vessel, and fertilize once every two to three weeks. Keeping the vessel with minimal water (quarter of the vessel filled) at all times is best for this plant. Orchids do not grow roots all year round, so after mounting this Orchid months can pass before you may see new roots growing. Although it is a highly durable orchid that can survive in a variety of conditions, maintaining optimal conditions will help keep the plant beautiful and healthy, and will encourage flowering.
Join the community and let's grow together.